Wednesday, March 23, 2011

Trojan Cover Mods

I got a brainstorm on how to improve the cover for the Trojan, and spent the day Friday working on a prototype. The cover fits perfect except  for the front section. My plan is to make that in two parts, the windshield and the forward fuselage. Both are flat , two dimensional curves. The wind died down a little today so I went out with my paper and tools to make some patterns. Here is the windshield pattern.
This pattern extends from the first seam on the cover at the top of the windshield to the point where the windshield meets the fuselage. I used old masking paper from painting the Cub wings. I then fitted a paper pattern to the fuselage, here is a picture.
The yellow masking tape marks the edge of the cover when installed.
Here it is all together.

This mod would add one seam at the base of the windshield, the remainder of the cover would stay the same. I tried to get Scott's mother in law to sew up a test section using the blue test cover we made initially , however she said the material was too thick for her machine. So, Monday I sent all this data to Kennon and Joe said he would check with his designer and get back to me.
Saturday , Scott and I spent all day at the Richmond FSDO IA mechanic refresher seminar. The highlight of the day was the gay guy that talked about batteries for two hours. The guy was very knowledgeable , but it was kinda like listening to Elmer Fudd talk about batteries.
Sunday , I took the Trojan back to Wakefield and I'm glad I did, we have had thunderstorms every day this week. 

Wednesday, March 16, 2011

Rod's Cub

Yesterday , Scott and I spent a marathon day finishing the installation of  a Don's dream machine motor in Rod's Cub. We had spent several days working on this and his exhaust had to go back to Dawley 3 times so the project dragged out. The motor looked really nice and at $8250 exchange it was not really a bad deal and comes with a warranty.   We really took some extra time and corrected a lot of items that were potential trouble areas. Rod was a good sport and was willing to do it right. Here is the work in process, we rerouted the lower spark plug wires for better support after this shot was taken. Not sure about those yellow tie wraps?
Here's Scott working on the carb heat control while Rod supervises. Since he upgraded to an A75 engine he had to buy a new propeller. I bought his old (but recently rebuilt) 12 lamination 72CK44 prop .
Here is the happy crew just before the roll out for the flame test. It was a little chilly on Tuesday the coveralls are the bomb.
The moment of truth, started on the second pull.
It was too late and windy to fly, but I heard he flew today with no problems. Supposed to be really nice through the weekend so he should get some time on it before S&F Cub convoy.
Today I helped Buzz get his Cub ready for the long trip to Florida. He wanted to do the rope procedure on his #2 cylinder. I can do this in 20 minutes now because I do the #2 cylinder on the Trojan at every annual now. On disassembly I was surprised it had not stuck already it was really stiff in the guide. Buzz says that all but two people have backed out of the group flight down to S&F. If you know anybody going that would like to go down with some company drop me a note and I will put them in touch.

Monday, March 14, 2011

Trojan Man Covered

I have always wanted a travel cover for the Trojan. The sliding canopy leaks a little when it rains and with all that plexiglass the sun really bakes the cockpit when it is all closed up. Last summer it got so hot that it fried the display on my Garmin GPS mounted on the dash. I tried to get Bruce's custom covers to make me one but they would not do it without the plane for fitting and measuring. I talked to a local guy , but the price was a little too high. Then , one day while surfing I found Kennon Covers and shot them an Email with some pictures. They came right back and said no problem. They do a lot of military work where they don't have access to the machine. They model the whole thing in CAD and make from that. So , I sent them some detailed dimensions and lots of pictures and they made a pattern out of some cheaper material for a trial fitting.

  With this trial fitting we measured for the straps. It is not an optimal configuration for the hold down straps because of the cowl side vents don't let the strap pull forward. I went with the simple hole for the antennas instead of the velcro slit we originally planned. With the antennas so close together a "sock" probably would not work very good. Here is the final product, it has a little slack at the front around the windshield that I think could be improved, but overall it came out OK. It's been through some pretty good spring wind and seems to stay in place. It is supposed to rain this week so I will see how the antenna hole works, little worried about the water getting under the cover.  
Overall I think it came out pretty good considering they never saw the airplane! Should keep that S&F dirt out!