Sunday, May 13, 2012

100 hours

Last week I spotted this really cool Funk project on Ebay.


I have always liked the Funk, this is a B75L with the geared Lycoming GO145-C3 engine. Beyond odd ball, but right up my alley ! Check out the metal in the cowling.



You would think it would be updraft cooling but it's not. Air goes up, turns 180 degrees then exits at the back bottom of the cowl.  This project just happened to be right across the Delaware River from my friend Dave's airstrip, so I decided to fly the Cub up for a look/visit. Friday was forecast to be clear with some gusty winds so I left early to beat the turbulence. I left at 8 am and went direct to St. Marys MD 2W6 , I only made 55 knots on this leg. I then shot through the gap between the restricted airspace and the 30 mile ring. I climbed to 3500 feet for this over water leg and made better speed with almost a direct crosswind. I landed at Delaware Airpark 33N right at 11:00 , the crosswind landing was a little bouncy, but we got down in one piece.  Here is a shot of Dave's Cub and mine at 33N.

  
We are parked into the wind, you can see the trees that made that right crosswind interesting ! We spent a couple hours looking over the Funk and other airplanes he had for sale , then we had an excellent Crab cake sandwich at a place called Sambo's. It was right on the dock and you could watch them unload the catch while you ate! It took all the will power I had to get away with out making an offer on the Funk, just too many projects. We left and made the short flight across the river to Dave's strip 7NJ9. Here the wind was down the runway but with the trees close on both sides it was still challenging to get er down. We got the airplanes together for a group shot.


You can see the narrow runway behind the planes and the trees that make it interesting. Here are Dave's Cub and Pitts S1C , his friend's CASA Jungmann and my Cub. In this shot Dave's hanger / shop is in the background.


The next morning I got up early to beat the turbulence on the way home. I took off at 7:45 , climbed to 2500 feet and flew all the way to St. Marys without one bump ! Here are a few shots, say are you sure you torqued those rod bolts?


Over the Delaware river.


The tach reads 100 rpm fast, so about 2275 rpm, 95 indicated, GS was 78 knots at 2600 feet to go over some class D airspace at Dover. Oil pressure runs about 35 psi and the temp is about 150 it was cool in the morning , the heater is on ! The g's are from bumps during taxi. Here's my new fuel gauge, 10 gallons remaining.



Here I am crossing the Chesapeake Bay you can see the LNG facility and storage tanks. I have never seen a ship off loading. You can see Patuxent River  NAS in the background.  It was nice of them to leave a little gap for aeroplanes to get through.


My fuel stop is just ahead at St. Marys County, MD.  I love credit card fuel, that way I'm only a bother to myself for  5 gallons of fuel ! The flight to JGG was just as nice with just a little turbulence about 30 miles out. The Cub ran smooth the whole trip, and we turned 104 hours on the tach.

Sunday, April 29, 2012

Carwil Type 61

This post will illustrate the differences between the Carwil Type 61 bubble face compass and the more common Airpath bubble face compass. This information is from my 1940 issue of the Airplane Parts and Supplies Catalog No. 101. It appears that the Carwil came first and the Airpath was a later improved model. Here are some pictures from the catalog.



  
Here is the description from the catalog that explains the different models.


I will show some of the differences between the Carwil model and the Airpath. Many of the parts are the same with the biggest difference being the front face appearance. I think this is a 60C even though the name plate says Type 61.



  



Here you can see the unusual compensator , it uses thin rod magnets inserted into drilled holes in a clear plastic block. It uses tiny brass doors to keep the rods in place. If anyone has any instructions for this procedure I would love to see a copy. Here is another shot with the unit removed.


You can see the little doors and the rod magnets.  Now here are a few shots of the later Airpath Compass you can see the difference in the front face.


The top of the back case also has a flat area that the early model does not.


The compensator from the later Airpath is much improved. It allows a much finer adjustment of the magnetic fields.


This side is for E-W adjustment and the other side compensates the N-S direction.


You can see that the later model is much longer and thicker than the original model. I have seen these ground down in a lame attempt to fit the early case. It does not work well.   The front plate is held to the compensator assembly by two small drive screws, then held to the compass by one small screw. I have sen these read Carwil, Airpath, and Taylorcraft.




When I did a Google search for Carwil Type 61 nothing came up maybe this will fix that! If I have time this week I will post some pictures of my antique compasses !

Saturday, April 28, 2012

Va EAA Flyin

Today I flew the Cub down to Suffolk, VA for the VA EAA flyin. With a stationary front laying along the VA-NC border the weather forecast was for rain showers in the afternoon so the turnout was light and mostly local. I had a beautiful smooth flight down with a high overcast keeping the temperature a little on the cool side. Here are a few pictures from the day.


I was parked between a Pietenpol and a 1965 7ECA Citabria, down the line is a British Bulldog , a Lancair, and a C-195. you can see the cloudy skies. There was a cold North East wind also. Here's the little Citabria , I've always liked these, this one was a little rough.



The highlight of the day was getting to sit in one of the "new" built ME-262's at the fighter factory hangar. My friend Scott knows the Chief pilot there. I forgot to get a picture of me in it. It is just like the original F-18, "one man, one hour, one bomb" . With only 400 gal fuel and 2 CJ-610 engines, and no RVSM you would be out of fuel in about an hour! Here's Mike and Scott.



I spotted this in the Ultralight area, just where you want to see pipe wrench marks, on the Jesus nut that holds the prop !! For goodness sake buy the right wrench !!


I spotted this in the RV area. I'm not sure if he wanted this effect or if he F'ed up??  Not sure you can really see it in the pictures but the skin was sunken in between the ribs, like a fabric airplane.




How did he do this ? It looks like a plywood covered wing after 20 years. You can see the effect in the reflection in this shot.



There was also this nice Pietenpol over in the camping section.


I left right after the Parade of Flight at 1:30 but I stayed too long and got caught in some rain about 15 south of Williamsburg. I turned this into an opportunity to clean up the Cub so she got a sponge bath and towel dry in the hangar. Since the airport is on wet lands the EPA says we can't wash airplanes.
That's about it  for VA EAA,  nice flight down, great pancake breakfast with good friends, low turn out but some nice aeroplanes. They were actually lucky , it could have been a complete wash out.